Al13Fe4: enthalpy of formation

2 accepted literature formation-enthalpy value(s) (model 2); Materials Project -31.526 kJ/mol-atom (mp-aaacqllk); OQMD -31.902 kJ/mol-atom (oqmd-2050075).

Systems: Al–Fe

Literature values

Enthalpy of formation of Al13Fe4 reported in the literature (2)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-22.8 kJ/mol-atomθ-Al13Fe4298.15modelAl–Fe[1] Ilatovskaia 2023Table 3, p. 6, row 11
report
-21.77 kJ/mol-atomθ-Al13Fe4298.15modelAl–Fe[1] Ilatovskaia 2023
cites Zienert 2018 doi
Table 3, p. 6, row 10
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of Al13Fe4
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-22.8kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9
-21.77kJ/mol-atom0.0053.9 (model_calculated, calibrated)3.9

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of Al13Fe4
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaacqllk-31.526-0.32675C2/m00no
OQMDoqmd-2050075-31.902-0.330641C2/m00yes

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. M. Ilatovskaia, H. Becker, O. Fabrichnaya, A. Leineweber, The η-Al5Fe2 phase in the Al–Fe system: The issue with the sublattice model, Journal of Alloys and Compounds 936, 168361 (2023). doi:10.1016/j.jallcom.2022.168361