Al3Y: enthalpy of formation

3 accepted literature formation-enthalpy value(s) (experimental 2, model 1); experimental median -47.3 kJ/mol-atom (n = 2); Materials Project -42.248 kJ/mol-atom (mp-aaabxgjn); OQMD -42.348 kJ/mol-atom (oqmd-321899).

Systems: Al–Y

Literature values

Enthalpy of formation of Al3Y reported in the literature (3)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-47.5 kJ/mol-atomYAl3763experimentalEMFAl–Y[1] Gröbner 1995
cites F 1988
Table 1, p. 2, row 7
report
-47.1 kJ/mol-atomYAl3298.15experimentalCombustion calorimetryAl–Y[1] Gröbner 1995
cites Snyder 1960
Table 1, p. 2, row 1
report
-47.5 kJ/mol-atomYAl3modelAl–Y[1] Gröbner 1995Table 1, p. 2, row 2
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of Al3Y
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-47.5kJ/mol-atom0.054.6 (emf, cleaned_below_threshold)4.6
-47.1kJ/mol-atom0.051 (combustion_calorimetry, cleaned_below_threshold)1
-47.5kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of Al3Y
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaabxgjn-42.248-0.43787P6_3/mmc00no
OQMDoqmd-321899-42.348-0.438904P63/mmc00yes

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. J. Gröbner, H.-L. Lukas, F. Aldinger, Thermodynamic calculations in the YAlC system, Journal of Alloys and Compounds 220, 8-14 (1995). doi:10.1016/0925-8388(94)06028-2