AlB2: enthalpy of formation

5 accepted literature formation-enthalpy value(s) (experimental 1, model 4); experimental median -22.3 kJ/mol-atom (n = 1); Materials Project -4.148 kJ/mol-atom (mp-aaaaabki); OQMD -4.243 kJ/mol-atom (oqmd-103360).

Systems: Al–B

Literature values

Enthalpy of formation of AlB2 reported in the literature (5)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-22.3 kJ/mol-atom ± 4.2AlB2298.15experimentalAl–B[1] Campbell 1999
cites Domalski 1967 doi
Table 7, p. 7, row 1
report
-50.332 kJ/mol-atomAlB2298.15modelAl–B[1] Campbell 1999
cites Barin 1989
Table 7, p. 7, row 3
report
-28.603 kJ/mol-atomAlB2298.15modelAl–B[1] Campbell 1999
cites Fries doi
Table 7, p. 7, row 2
report
-21.8 kJ/mol-atomAlB2298.15modelAl–B[1] Campbell 1999
cites Batzner 1994
Table 7, p. 7, row 4
report
-19.1 kJ/mol-atomAlB2298.15modelAl–B[1] Campbell 1999Table 7, p. 7, row 5
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of AlB2
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-22.3kJ/mol-atom4.20.053.5 (unknown, calibrated)4.2
-50.332kJ/mol-atom5.000e-43.9 (model_calculated, calibrated)3.9
-28.603kJ/mol-atom5.000e-43.9 (model_calculated, calibrated)3.9
-21.8kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9
-19.1kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of AlB2
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaaaabki-4.148-0.042988P6/mmm0.9780.0101no
OQMDoqmd-103360-4.243-0.043977P6/mmm00no

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. C. E. Campbell, U. R. Kattner, A thermodynamic assessment of the Ni-Al-B system, JPE 20, 485-496 (1999). doi:10.1361/105497199770340743