CrGa: enthalpy of formation

4 accepted literature formation-enthalpy value(s) (model 4); Materials Project -1.491 kJ/mol-atom (mp-aaacphey); OQMD -0.148 kJ/mol-atom (oqmd-2052343).

Systems: Cr–Ga

Literature values

Enthalpy of formation of CrGa reported in the literature (4)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-16 kJ/mol-atomCrGa298.15modelCr–Ga[1] Gröbner 1999
cites F 1988
Table 1, p. 2, row 45
report
-7.29 kJ/mol (basis unstated)CrGamodelAssessedCr–Ga[2] Belgacem-Bouzida 2005
cites Grobner 1999 doi
Table 4, p. 4, row 8
report
-7.29 kJ/mol-atomCrGa298.15modelCr–Ga[1] Gröbner 1999Table 1, p. 2, row 46
report
-6.06 kJ/mol (basis unstated)CrGamodelAssessedCr–Ga[2] Belgacem-Bouzida 2005Table 4, p. 4, row 9
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of CrGa
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-16kJ/mol-atom0.53.9 (model_calculated, calibrated)3.9
-7.29kJ/mol (basis unstated)0.0057.8 (model_calculated, calibrated)7.8
-7.29kJ/mol-atom0.0053.9 (model_calculated, calibrated)3.9
-6.06kJ/mol (basis unstated)0.0057.8 (model_calculated, calibrated)7.8

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of CrGa
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaacphey-1.491-0.015457R-3m7.93570.0822no
OQMDoqmd-2052343-0.148-0.001532R-3m9.50760.0985yes

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. J. Gröbner, R. Wenzel, G. G. Fischer, R. Schmid-Fetzer, Thermodynamic calculation of the binary systems M-Ga and investigation of ternary M-Ga-N phase equilibria (M=Ni, Co, Pd, Cr), JPE 20, 615-625 (1999). doi:10.1361/105497199770340608
  2. A. Belgacem-Bouzida, Y. Djaballah, M. Notin, Calorimetric measurement of the intermetallic compounds Cr3Ga and CrGa4 and thermodynamic assessment of the (Cr–Ga) system, Journal of Alloys and Compounds 397, 155-160 (2005). doi:10.1016/j.jallcom.2005.01.026