MgY: enthalpy of formation

3 accepted literature formation-enthalpy value(s) (experimental 2, model 1); experimental median -21.45 kJ/mol-atom (n = 2); Materials Project -10.689 kJ/mol-atom (mp-aaaaaaxr); OQMD -10.582 kJ/mol-atom (oqmd-1221128).

Systems: Mg–Y

Literature values

Enthalpy of formation of MgY reported in the literature (3)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-30.3 kJ/mol-atomYMg298.15experimentalcalorimetryMg–Y[1] Fabrichnaya 2003
cites Pyagai 1990
Table 4, p. 5, row 2
report
-12.6 kJ/mol-atomYMg298.15experimentalcalorimetryMg–Y[1] Fabrichnaya 2003
cites Smith 1965
Table 4, p. 5, row 1
report
-15.6 kJ/mol-atomYMgmodelCalphadMg–Y[1] Fabrichnaya 2003Table 4, p. 5, row 3
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of MgY
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-30.3kJ/mol-atom0.053.2 (solution_reaction_calorimetry, calibrated)3.2
-12.6kJ/mol-atom0.053.2 (solution_reaction_calorimetry, calibrated)3.2
-15.6kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of MgY
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaaaaaxr-10.689-0.110783Pm-3m00no
OQMDoqmd-1221128-10.582-0.109678Pmma00yes

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. O.B Fabrichnaya, H.L Lukas, G Effenberg, F Aldinger, Thermodynamic optimization in the Mg–Y system, Intermetallics 11, 1183-1188 (2003). doi:10.1016/s0966-9795(03)00156-0