NiPt: enthalpy of formation

9 accepted literature formation-enthalpy value(s) (experimental 2, model 1, DFT 6); experimental median -9.27 kJ/mol-atom (n = 2); Materials Project -9.177 kJ/mol-atom (mp-aaaaabkj); OQMD -9.756 kJ/mol-atom (oqmd-17788).

Systems: Ni–Pt

Literature values

Enthalpy of formation of NiPt reported in the literature (9)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-9.27 kJ/mol-atomNiPt–L10298.15experimentalExperiment [20]Ni–Pt[1] Lu 2009
cites Hultgren 1973
Table 1, p. 3, row 15
report
-9.27 kJ/mol-atomNiPt298.15experimentalNi–Pt[2] Kim 2011
cites Walker 1970 doi
Table 4, p. 4, row 13
report
-13.5 kJ/mol-atomNiPt–L100modelAssessment (this work)Ni–Pt[1] Lu 2009Table 1, p. 3, row 13
report
-11.76 kJ/mol-atomNiPt–L100DFTLMTO + CPA [19]Ni–Pt[1] Lu 2009
cites Ruban 1995 doi
Table 1, p. 3, row 6
report
-11.42 kJ/mol-atomNiPt–L100DFTFLMTO + CWM [17]Ni–Pt[1] Lu 2009
cites Amador 1993 doi
Table 1, p. 3, row 2
report
-9.23 kJ/mol-atomNiPt–L100DFTLAPW [18]Ni–Pt[1] Lu 2009
cites Lu 1993 doi
Table 1, p. 3, row 4
report
-8.98 kJ/mol-atomNiPt–L100DFTVASP (relaxed value)Ni–Pt[1] Lu 2009Table 1, p. 3, row 11
report
-8.98 kJ/mol-atomNiPt0DFTVASP (relaxation)Ni–Pt[2] Kim 2011
cites Lu 2009 doi
Table 4, p. 4, row 12
report
-7.64 kJ/mol-atomNiPt–L100DFTVASP (no relaxation)Ni–Pt[1] Lu 2009Table 1, p. 3, row 9
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of NiPt
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-9.27kJ/mol-atom0.0054.1 (experimental_unspecified, cleaned_below_threshold)4.1
-9.27kJ/mol-atom0.0053.5 (unknown, calibrated)3.5
-13.5kJ/mol-atom0.053.9 (model_calculated, calibrated)3.9
-11.76kJ/mol-atom0.0053.929 (dft, calibrated)3.929
-11.42kJ/mol-atom0.0053.929 (dft, calibrated)3.929
-9.23kJ/mol-atom0.0053.929 (dft, calibrated)3.929
-8.98kJ/mol-atom0.0053.929 (dft, calibrated)3.929
-8.98kJ/mol-atom0.0053.929 (dft, calibrated)3.929
-7.64kJ/mol-atom0.0053.929 (dft, calibrated)3.929

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of NiPt
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaaaabkj-9.177-0.095116P4/mmm00no
OQMDoqmd-17788-9.756-0.101117P4/mmm00no

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. Xiao-Gang Lu, Bo Sundman, John A˚gren, Thermodynamic assessments of the Ni–Pt and Al–Ni–Pt systems, Calphad 33, 450-456 (2009). doi:10.1016/j.calphad.2009.06.002
  2. DongEung Kim, James E. Saal, Liangcai Zhou, ShunLi Shang, Yong Du, Zi-Kui Liu, Thermodynamic modeling of fcc order/disorder transformations in the Co–Pt system, Calphad 35, 323-330 (2011). doi:10.1016/j.calphad.2011.04.005