ZnZr: enthalpy of formation

6 accepted literature formation-enthalpy value(s) (experimental 1, model 3, DFT 2); experimental median -58.4 kJ/mol-atom (n = 1); Materials Project -27.71 kJ/mol-atom (mp-aaabglps); OQMD -27.234 kJ/mol-atom (oqmd-116235).

Systems: Zn–Zr

Literature values

Enthalpy of formation of ZnZr reported in the literature (6)
ValuePhase as printedT (K)ClassMethodSystemSourceLocationQuote
-58.4 kJ/mol-atom ± 1.3ZnZr298.15experimentalZn–Zr[1] Arroyave 2006
cites Chiotti 1960
Table 5, p. 8, row 30
report
-29.07 kJ/mol-atomZnZr298.15modelZn–Zr[1] Arroyave 2006Table 5, p. 8, row 34
report
-28.62 kJ/mol-atomZnZr298.15modelZn–Zr[1] Arroyave 2006Table 5, p. 8, row 33
report
-28.47 kJ/mol-atomZnZr298.15modelZn–Zr[1] Arroyave 2006Table 5, p. 8, row 35
report
-29.68 kJ/mol-atomZnZr298.15DFTLDAZn–Zr[1] Arroyave 2006
cites Arroyave 2005
Table 5, p. 8, row 31
report
-27.6 kJ/mol-atomZnZr298.15DFTGGAZn–Zr[1] Arroyave 2006
cites Arroyave 2005
Table 5, p. 8, row 32
report

Uncertainty budget

Components kept separate, in the value's unit (literature SCHEMA.md, UNCERTAINTY_CALIBRATION.md): effective = max(sqrt(max(printed, reading, method)^2 + composition^2 + conversion^2), scatter). The method floor is the robust between-study scatter of the method class in ORCHID (calibrated) or a documented prior; printed values and printed uncertainties are unchanged.

Uncertainty budget of the literature values of ZnZr
ValueUnitPrintedReadingMethod (class, basis)CompositionScatterConversionEffective
-58.4kJ/mol-atom1.30.053.5 (unknown, calibrated)3.5
-29.07kJ/mol-atom0.0053.9 (model_calculated, calibrated)3.9
-28.62kJ/mol-atom0.0053.9 (model_calculated, calibrated)3.9
-28.47kJ/mol-atom0.0053.9 (model_calculated, calibrated)3.9
-29.68kJ/mol-atom0.0058.395 (dft, calibrated)8.395
-27.6kJ/mol-atom0.058.395 (dft, calibrated)8.395

DFT formation energies

Lowest-energy entries at this composition. Materials Project and OQMD use different energy references and are never averaged. 1 eV/atom = 96.485 kJ/mol-atom.

DFT formation energy of ZnZr
SourceEntrykJ/mol-atomeV/atomSpace groupE above hull (kJ/mol-atom)E above hull (eV/atom)Theoretical
Materials Projectmp-aaabglps-27.71-0.28719Pm-3m00no
OQMDoqmd-116235-27.234-0.282259Pm-3m00no

DFT sources: A. Jain et al., Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1 (2013) 011002. doi:10.1063/1.4812323 (CC BY 4.0); J. E. Saal et al., JOM 65 (2013) 1501-1509; S. Kirklin et al., npj Comput. Mater. 1 (2015) 15010. doi:10.1007/s11837-013-0755-4 (CC BY 4.0);

Sources

  1. R. Arroyave, Z.K. Liu, Thermodynamic modelling of the Zn–Zr system, Calphad 30, 1-13 (2006). doi:10.1016/j.calphad.2005.12.006