Al–Co–Cr system

62 accepted literature values from 2 paper(s) (model 39, DFT 23); 0 calculated phase diagram(s).

Data: JSON · CSV · interactive explorer · papers (bibliography) · Markdown

Accepted values by evidence class
Evidence classValues
model39
DFT23
Accepted values by property group
Property groupValues
formation39
mixing / partial23

Formation enthalpies

Literature values in kJ/mol-atom where the per-atom basis is known. DFT columns: the lowest-energy entry at the same composition (Materials Project 2026.04.13, OQMD v1.8; different energy references, never averaged), from dft_parity.json.

Enthalpies of formation, Al–Co–Cr system (22)
PhaseCompoundValueT (K)ClassMP DFT (kJ/mol-atom)OQMD DFT (kJ/mol-atom)SourceLocationQuote
B2-66.89 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 1
report
B2-64.45 kJ/mol-atom298.15model[1] Liu 2015
cites ref. 64
Table 3, p. 12, row 2
report
B2-57.67 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 1
report
B2-7.37 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 4
report
B2-2.78 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 4
report
B211.98 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 3
report
B216.6 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 3
report
σ-30.56 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 5
report
σ-24.58 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 5
report
σ-18.93 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 6
report
σ-13.39 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 6
report
σ1.84 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 14
report
σ3.6 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 7
report
σ5.72 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 10
report
σ5.73 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 13
report
σ6.19 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 10
report
σ6.2 kJ/mol-atom0model[1] Liu 2015Table 3, p. 12, row 11
report
σ8.39 kJ/mol-atom0model[1] Liu 2015
cites ref. 65
Table 3, p. 12, row 12
report
σ9.62 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 7
report
σ9.84 kJ/mol-atom0model[1] Liu 2015Table 3, p. 12, row 8
report
σ11.24 kJ/mol-atom298.15model[1] Liu 2015Table 3, p. 12, row 13
report
σ11.65 kJ/mol-atom0model[1] Liu 2015
cites ref. 65
Table 3, p. 12, row 9
report

Other properties

Formation (17)

Formation, Al–Co–Cr system
PropertyValueT (K)Phases / compositionClassSourceLocationQuote
Entropy of formation
printed: ΔfS (SER)
1.03 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 3
report
Entropy of formation
printed: ΔfS
-1.73 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 3
report
Entropy of formation
printed: ΔfS
-13.73 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 1
report
Entropy of formation
printed: ΔfS (SER)
-8.23 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 1
report
Entropy of formation
printed: ΔfS (SER)
-6.45 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 4
report
Entropy of formation
printed: ΔfS
-9.18 J/mol (basis unstated)/K298.15B2model[1] Liu 2015Table 3, p. 12, row 4
report
Entropy of formation
printed: ΔfS
-11.43 J/mol (basis unstated)/K298.15B2model[1] Liu 2015
cites ref. 64
Table 3, p. 12, row 2
report
Entropy of formation
printed: ΔfS (SER)
-4.05 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 5
report
Entropy of formation
printed: ΔfS
-7.33 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 5
report
Entropy of formation
printed: ΔfS (SER)
-1.13 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 6
report
Entropy of formation
printed: ΔfS
-4.44 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 6
report
Entropy of formation
printed: ΔfS
0.28 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 7
report
Entropy of formation
printed: ΔfS (SER)
3.6 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 7
report
Entropy of formation
printed: ΔfS (SER)
0.16 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 10
report
Entropy of formation
printed: ΔfS (SER)
-2.74 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 13
report
Entropy of formation
printed: ΔfS
-6.02 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 13
report
Entropy of formation
printed: ΔfS
-3.32 J/mol (basis unstated)/K298.15σmodel[1] Liu 2015Table 3, p. 12, row 14
report

Mixing / partial (23)

Mixing / partial, Al–Co–Cr system
PropertyValueT (K)Phases / compositionClassSourceLocationQuote
Enthalpy of mixing
printed: ΔHmix
-7.86 kJ/mol-atom0A2
alloy: Al 0.33, Co 0.33, Cr 0.33
DFT[1] Liu 2015Table 4, p. 13, row 13
report
Enthalpy of mixing
printed: ΔHmix
-6.69 kJ/mol-atom0A2
alloy: Al 0.25, Co 0.5, Cr 0.25
DFT[2] Liu 2016
cites Al11Cr2
Table 6, p. 40, row 20
report
Enthalpy of mixing
printed: ΔHmix
-9.36 kJ/mol-atom0A2
alloy: Al 0.5, Co 0.25, Cr 0.25
DFT[1] Liu 2015Table 4, p. 13, row 10
report
Enthalpy of mixing
printed: ΔHmix
-1.17 kJ/mol-atom0A2
alloy: Al 0.25, Co 0.25, Cr 0.5
DFT[1] Liu 2015Table 4, p. 13, row 12
report
Enthalpy of mixing
printed: ΔHmix
-0.86 kJ/mol-atom0A2
alloy: Al 0.25, Co 0.25, Cr 0.5
DFT[2] Liu 2016
cites Al11Cr2
Table 6, p. 40, row 21
report
Enthalpy of mixing
printed: ΔHmix
-6.86 kJ/mol-atom0A2
alloy: Al 0.25, Co 0.5, Cr 0.25
DFT[1] Liu 2015Table 4, p. 13, row 11
report
Enthalpy of mixing
printed: ΔHmix
-9.42 kJ/mol-atom0A2
alloy: Al 0.5, Co 0.25, Cr 0.25
DFT[2] Liu 2016
cites Al11Cr2
Table 6, p. 40, row 19
report
Enthalpy of mixing
printed: ΔHmix
-49.54 kJ/mol-atom0B2
alloy: Al 0.5, Co 0.375, Cr 0.125
DFT[1] Liu 2015Table 4, p. 13, row 25
report
Enthalpy of mixing
printed: ΔHmix
-9.96 kJ/mol-atom0B2
alloy: Al 0.125, Co 0.5, Cr 0.375
DFT[1] Liu 2015Table 4, p. 13, row 17
report
Enthalpy of mixing
printed: ΔHmix
8.22 kJ/mol-atom0B2
alloy: Al 0.25, Co 0.25, Cr 0.5
DFT[2] Liu 2016
cites Al11Cr2
Table 8, p. 42, row 8
report
Enthalpy of mixing
printed: ΔHmix
-18.49 kJ/mol-atom0B2
alloy: Al 0.5, Co 0.125, Cr 0.375
DFT[1] Liu 2015Table 4, p. 13, row 23
report
Enthalpy of mixing
printed: ΔHmix
-32.77 kJ/mol-atom0B2
alloy: Al 0.5, Co 0.25, Cr 0.25
DFT[2] Liu 2016
cites Al11Cr2
Table 8, p. 42, row 2
report
Enthalpy of mixing
printed: ΔHmix
-27.2 kJ/mol-atom0B2
alloy: Al 0.25, Co 0.5, Cr 0.25
DFT[2] Liu 2016
cites Al11Cr2
Table 8, p. 42, row 5
report
Enthalpy of mixing
printed: ΔHmix
8.22 kJ/mol-atom0B2
alloy: Al 0.25, Co 0.25, Cr 0.5
DFT[1] Liu 2015Table 4, p. 13, row 20
report
Enthalpy of mixing
printed: ΔHmix
-32.77 kJ/mol-atom0B2
alloy: Al 0.5, Co 0.25, Cr 0.25
DFT[1] Liu 2015Table 4, p. 13, row 24
report
Enthalpy of mixing
printed: ΔHmix
-47.66 kJ/mol-atom0B2
alloy: Al 0.375, Co 0.5, Cr 0.125
DFT[1] Liu 2015Table 4, p. 13, row 15
report
Enthalpy of mixing
printed: ΔHmix
-27.2 kJ/mol-atom0B2
alloy: Al 0.25, Co 0.5, Cr 0.25
DFT[1] Liu 2015Table 4, p. 13, row 16
report
Enthalpy of mixing
printed: ΔHmix
-11.66 kJ/mol-atom0γ
alloy: Al 0.5, Co 0.25, Cr 0.25
DFT[2] Liu 2016Table 7, p. 41, row 19
report
Enthalpy of mixing
printed: ΔHmix
-11.39 kJ/mol-atom0γ
alloy: Al 0.25, Co 0.5, Cr 0.25
DFT[2] Liu 2016Table 7, p. 41, row 20
report
Enthalpy of mixing
printed: ΔHmix
-18.06 kJ/mol-atom0γ
alloy: Al 0.25, Co 0.25, Cr 0.5
DFT[2] Liu 2016Table 7, p. 41, row 21
report
Enthalpy of mixing
printed: ΔHmix
-25.57 kJ/mol-atom0γ’
alloy: Al 0.375, Co 0.25, Cr 0.375
DFT[2] Liu 2016Table 9, p. 43, row 5
report
Enthalpy of mixing
printed: ΔHmix
-12.37 kJ/mol-atom0γ’
alloy: Al 0.25, Co 0.375, Cr 0.375
DFT[2] Liu 2016Table 9, p. 43, row 2
report
Enthalpy of mixing
printed: ΔHmix
-14.04 kJ/mol-atom0γ’
alloy: Al 0.375, Co 0.375, Cr 0.25
DFT[2] Liu 2016Table 9, p. 43, row 8
report

Sources

Reporting papers the values were read from (a value cited from another work names that work in its row).

  1. Xuan L. Liu, Thomas Gheno, Bonnie B. Lindahl, Greta Lindwall, Brian Gleeson, Zi-Kui Liu, First-Principles Calculations, Experimental Study, and Thermodynamic Modeling of the Al-Co-Cr System, PLoS ONE 10, e0121386 (2015). doi:10.1371/journal.pone.0121386
  2. Xuan L. Liu, Greta Lindwall, Thomas Gheno, Zi-Kui Liu, Thermodynamic modeling of Al–Co–Cr, Al–Co–Ni, Co–Cr–Ni ternary systems towards a description for Al–Co–Cr–Ni, Calphad 52, 125-142 (2016). doi:10.1016/j.calphad.2015.12.007